Joel McCormack

Joel McCormack is the designer of the NCR Corporation version of the p-code machine, which is a kind of stack machine popular in the 1970s as the preferred way to implement new computing architectures and languages such as Pascal and BCPL. The NCR design shares no common architecture with the Pascal MicroEngine designed by Western Digital but both were meant to execute the UCSD p-System.[1,2]

Urs Ammann, a student of Niklaus Wirth, originally presented p-code in his PhD thesis (see Urs Ammann, On Code Generation in a Pascal Compiler, Software—Practice and Experience, Vol. 7, No. 3, 1977, pp. 391–423).The central idea is that a complex software system is coded for a non-existent, fictitious, minimal computer or virtual machine and that computer is realized on specific real hardware with an interpreting computer program that is typically small, simple, and quickly developed.The Pascal programming language had to be re-written for every new computer being acquired, so Ammann proposed writing the system one time to a virtual architecture.The successful academic implementation of Pascal was the UCSD p-System developed by Kenneth Bowles, a professor at UCSD, who began the project of developing a universal Pascal programming environment using the P-machine architecture for the multitude of different computing platforms in use at that time.McCormack was part of a team of undergraduates working on the project.[3]He took this familiarity and experience with him to NCR.

In 1979 McCormack was employed by NCR right out of college, and they had developed a Bit slicing implementation of the p-code machine using the Am2900 chip set. This CPU had a myriad of timing and performance problems soMcCormack proposed a total redesign of the processor using a programmable logic device based Microsequencer. McCormack left NCR to start a company called Volition Systems but continued the work on the CPU as a contractor. The new CPU used an 80-bit wide microword, so parallelism in the microcode was radically enhanced.There were several loops in the microcode that were a single instruction long andmany of the simpler p-code ops took 1 or 2 microcode instructions.With the wide microword and the way the busses were carefully arranged, as well as incrementing memory address registers, the cpu could execute operations inside the ALU while transferring a memory word directly to the onboard stack, or feed one source into the ALU while sending a previously computed register to the destination bus in a single microcycle.

The cpu ran at three different clock speeds (using delay lines for a selectable clock); two bits in the microword selected the cycle time for that instruction.The clocks around 130, 150, and 175 nanoseconds.Newer parts from AMD would have allowed a faster 98 ns cycle for the fastest instructions, but they didn't come out with a correspondingly faster branch control unit.

There was a separate prefetch/instruction formatting unit (again, using stoppable delay line clocks for synchronization...asynchronous logic allows for skewed timings).It had a 32-bit buffer and could deliver up the next data as a signed byte, unsigned byte, 16-bit word, or "big" operand (the one-or-two byte format where 0..127 was encoded as one byte, and 128..32767 was encoded as two bytes).

There was an onboard stack of 1024 16-bit words, so that both scalars and sets could be operated on there.The top of the stack was actually kept in one of the AMD 2901's registers, so that simple operations like integer addition took a single cycle. before we stole the technique of keeping the top word of the stack in one of the AMD 2901 registers.These often resulted in one fewer microinstructions.(The stack doesn't quite operate this way...it decrements before data is written to it, and increments after data is read.)

Since next-address control and next microcode location were in each wide microword, there was no penalty for any-order execution of the microcode.Thus, we had a table of 256 labels, and the microcode compiler moved the first instruction at each of those labels to the first 256 locations of microcode memory.The only restriction this placed upon the microcode was that if the p-code required more than one microinstruction, then the first microinstruction couldn't have any flow control specified (as it would be filled in with a "goto <rest of microcode for p-code>).

The CPU used the technique of keeping the top word of the stack in one of the AMD 2901 registers.This often resulted in one fewer microinstructions.For example, here are a few p-codes the way they ended up.tos is a register, and q is a register."|" means parallel activities in a single cycle.(The stack doesn't quite operate this way...it decrements before data is written to it, and increments after data is read.)

Since next-address control and next microcode location were in each wide microword, there was no penalty for any-order execution of the microcode.A table of 256 labels, and the microcode compiler moved the first instruction at each of those labels to the first 256 locations of microcode memory.The only restriction this placed upon the microcode was that if the p-code required more than one microinstruction, then the first microinstruction couldn't have any flow control specified (as it would be filled in with a "goto <rest of microcode for p-code>).

fetch	% Fetch and save in an AMD register the next byte opcode from% the prefetch unit, and go to that location in the microcode.q := ubyte | goto ubyteSLDCI	% Short load constant integer (push opcode byte)% Push top-of-stack AMD register onto real stack, load% the top-of-stack register with the fetched opcode that got us heredec(sp) | stack := tos | tos := q | goto fetchLDCI	% Load constant integer (push opcode word)% A lot like SLDCI, except fetch 2-byte word and "push" on stackdec(sp) | stack := tos | tos := word | goto fetchSLDL1	% Short load local variable at offset 1% mpd0 is a pointer to local data at offset 0.Write appropriate% data address into the byte-addressed memory-address-registermar := mpd0+2% Push tos, load new tos from memory
SLDX	dec(sp) | stack := tos | tos := memword | goto fetchLDL	% Load local variable at offset specified by "big" operandr0 := bigmar := mpd0 + r0 | goto sldxINCR	% Increment top-of-stack by big operandtos := tos + big | goto fetchADI	% Add two words on top of stacktos := tos + stack | inc(sp) | goto fetchEQUI	% Top two words of stack equal?test tos - stack | inc(sp)tos := 0 | if ~zero goto fetchtos := 1 | goto fetch

This architecture should be compared to the original P-code machine specification as proposed by Niklaus Wirth.

The end result was a 9"x11" board for the CPU that ran UCSD p-System faster than anything else, by a wide margin.As much as 35-50 times faster than the LSI-11 interpreter, and 7-9 times faster than the Western Digital Pascal MicroEngine did by replacing the LSI-11 microcode with p-code microcode.It also ran faster than the Niklaus Wirth Lilith machine but lacked the bit-mapped graphics capabilities, and around the same speed as a VAX-11/750 running native code. (But the VAX was hampered by the poor code coming out of the Berkeley Pascal compiler, and was also a 32-bit machine.)

• University of California, San Diego: BA, 1978
• University of California, San Diego: MS, 1979

• Digital Equipment Corporation
• Compaq Computer Corporation
• Hewlett-Packard
• Nvidia

• Joel McCormack,Robert McNamara.Efficient and Tiled Polygon Traversal Using Half-Plane Edge Functions, to appear as Research Report 2000/4, Compaq Western Research Laboratory, August 2000. [Superset of Workshop paper listed immediately below.]
• Joel McCormack, Robert McNamara. Tiled Polygon Traversal Using Half-Plane Edge Functions, Proceedings of the 2000 EUROGRAPHICS/SIGGRAPH Workshop on Graphics Hardware, ACM Press, New York, August 2000, pp. 15–21.
• Robert McNamara, Joel McCormack, Norman P. Jouppi. Prefiltered Antialiased Lines Using Half-Plane Distance Functions, Research Report 98/2, Compaq Western Research Laboratory, August 2000. [Superset of Workshop paper listed immediately below.]
• Robert McNamara, Joel McCormack, Norman P. Jouppi. Prefiltered Antialiased Lines Using Half-Plane Distance Functions, Proceedings of the 2000 EUROGRAPHICS/SIGGRAPH Workshop on Graphics Hardware, ACM Press, New York, August 2000, pp. 77–85.
• Joel McCormack, Keith I. Farkas, Ronald Perry, Norman P. Jouppi. Simple and Table Feline: Fast Elliptical Lines for Anisotropic Texture Mapping, Research Report 99/1, Compaq Western Research Laboratory, October 1999. [Superset of SIGGRAPH paper listed immediately below.]
• Joel McCormack, Ronald Perry, Keith I. Farkas, Norman P. Jouppi. Feline: Fast Elliptical Lines for Anisotropic Texture Mapping, SIGGRAPH 99 Conference Proceedings, ACM Press, New York, August 1999, pp. 243–250.
• Joel McCormack, Robert McNamara, Christopher Gianos, Larry Seiler, Norman P. Jouppi, Ken Correll, Todd Dutton, John Zurawski. Neon: A (Big) (Fast) Single-Chip 3D Workstation Graphics Accelerator, Research Report 98/1, Compaq Western Research Laboratory, Revised July 1999. [Superset of Workshop and IEEE Neon papers listed immediately below.]
• Joel McCormack, Robert McNamara, Christopher Gianos, Larry Seiler, Norman P. Jouppi, Ken Correll, Todd Dutton, John Zurawski. Implementing Neon: A 256-bit Graphics Accelerator, IEEE Micro, Vol. 19, No. 2, March/April 1999, pp. 58–69.
• Joel McCormack, Robert McNamara, Christopher Gianos, Larry Seiler, Norman P. Jouppi, Ken Correll. Neon: A Single-Chip 3D Workstation Graphics Accelerator, Proceedings of the 1998 EUROGRAPHICS/SIGGRAPH Workshop on Graphics Hardware, ACM Press, New York, August 1998, pp. 123–132. [Voted Best Paper/Presentation.]
• Joel McCormack, Robert McNamara. A Smart Frame Buffer, Research Report 93/1, Digital Equipment Corporation, Western Research Laboratory, January 1993. [Superset of USENIX paper listed immediately below.]
• Joel McCormack, Robert McNamara. A Sketch of the Smart Frame Buffer, Proceedings of the 1993 Winter USENIX Conference, USENIX Association, Berkeley, January 1993, pp. 169–179.
• Joel McCormack. Writing Fast X Servers for Dumb Color Frame Buffers, Research Report 91/1, Digital Equipment Corporation, Western Research Laboratory, February 1991. [Superset of the Software: Practice and Experience paper listed immediately below.]
• Joel McCormack. Writing Fast X Servers for Dumb Color Frame Buffers, Software - Practice and Experience, Vol 20(S2), John Wiley & Sons, Ltd., West Sussex, England, October 1990, pp. 83–108. [Translated and reprinted in the Japanese edition of UNIX Magazine, ASCII Corp., October 1991, pp. 76–96.]
• Hania Gajewska, Mark S. Manasse, Joel McCormack. Why X is Not Our Ideal Window System, Software - Practice and Experience, Vol 20(S2), John Wiley & Sons, Ltd., West Sussex, England, October 1990, pp. 137–171.
• Paul J. Asente and Ralph R. Swick, with Joel McCormack. X Window System Toolkit: The Complete Programmer's Guide and Specification, X Version 11, Release 4, Digital Press, Maynard, Massachusetts, 1990.
• Joel McCormack, Paul Asente. An Overview of the X Toolkit, Proceedings of the ACM SIGGRAPH Symposium on User Interface Software, ACM Press, New York, October 1988, pp. 46–55.
• Joel McCormack, Paul Asente. Using the X Toolkit, or, How to Write a Widget. Proceedings of the Summer 1988 USENIX Conference, USENIX Association, Berkeley, June 1988, pp. 1–14.
• Joel McCormack. The Right Language for the Job. UNIX Review, REVIEW Publications Co., Renton, Washington, Vol. 3, No. 9, September 1985, pp. 22–32.
• Joel McCormack, Richard Gleaves. Modula-2: A Worthy Successor to Pascal, BYTE, Byte Publications, Peterborough, New Hampshire, Vol. 8, No. 4, April 1983, pp. 385–395.